Renovating the Lady C - Fuel Lockers

Installing the New Fuel Lockers

Installing new fuel lockers for saddle tanks. There will be two lockers, one on each side of the boat.

Rough-in to determine locker dimensions

Fore and aft locker bulkheads.
So far, all locker plywood is ½-inch ACX, with epoxy coating
on the interior faces and fiberglass set in epoxy on the exterior faces.

Aft bulkhead glued in using structural epoxy.

Forward bulkhead and bottom glued in.

Front panel glued in.
The front panel is sized so the tanks can be removed without cutting any wood.