Now that I am done with the bottom modification, it is time to flip her over to work on the top.
 |
| Rough-out of Wheel Dolly Frame |
 |
| Completed Wheel Dolly |
 |
| Pull Her out of the Shop |
 |
| Construction Delay for the Inspector |
 |
| In Position for the Flip |
What are not shown in these photos are the two come-alongs on the other side of the boat that are tied to the base of two tress. The come-alongs prevent the boat from flipping to far too fast. The process is pull a little with the truck, let the come-alongs out a little, pull a little with the truck, let the come-alongs out a little, so on and so forth.
 |
| Ropes Installed for the Flip |
 |
| Slowly Easing Her Over |
 |
Installing Jacks and Blocking, Removing the Tires and
Installing the Wheel Dolly |
 |
| Wheel Dolly Assembled Under the Boat |
 |
| Back in the Shop |
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.